Headsets

Headsets

Computers

Computers

Laptops

Laptops

Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
  • Load image into Gallery viewer, Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With
Vendor
Hilitchi

Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With

3.5
Regular price
€50,00
Sale price
€50,00
Regular price
€82,00
Sold out
Unit price
per 
Save 39% (€32,00)
Error You can't add more than 500 quantity.

  • Tracked Shipping on All Orders
  • 14 Days Returns

Description

  • High Quality Professional Crimping Tool, easy to use!
  • Crimping capacity: 0.1-1.0m, For 2.54mm 3.96mm KF2510 connector AWG: 28-18
  • Wire-electrode cutting die sets promise a high-precision crimping result.
  • Length: 190mm/7.4inch, Weight: 384g/13.5oz

Shipping and Returns

  • We offer tracked shipping on all orders. Tracking information will be shared as soon as the order is dispatched.
  • Please check the delivery estimate before adding a product to the cart. This is displayed for every product on the website.
  • Available shipping methods and charges will be displayed at the time of checkout, depending on your exact location.
  • All customers are entitled to a return window of 14 days, starting from the date of delivery of the product(s).
  • Customers are advised to read our return policy for details of the return process, eligibility, refunds as well as cancellations or exchanges.
  • In case of any issues or concerns about Shipping or Returns, please contact us and we will be happy to help.

Customer Reviews

No instructions, can't figure out how to use it No instructions, can't figure out how to use it. Been watching Youtube videos for a while and reading the instructions that users wrote, and still can't figure it out. Very lazy seller to not at least include something on the page here. 1Instructions! An instruction sheet would be helpful. There were no included instructions and I ended up watching numerous videos on YouTube before I found one for these types of crimpers. The pins are loaded backward from how I expected them to load and are more suited for left handed use as a result. Kind of awkward but they get the job done nicely. 4Very hard to use, about 50% waste in connectors and crimps There are no instructions for the use of this tool. It is very easy to over crimp the thing you are crimping, and if you don't overcrimp, the wire can fall out even if you think you have done it all right and you seem to have captured the wire in the crimp. If you over crimp the item you are crimping you can't use the thing you crimp into a connector. 4These DO NOT Work for JST-XHP Connectors DO NOT PURCHASE for the JST-XHP connectors. They do not work fo these and I can find no way to make them work. These crimpers work well for DuPont connectors, but not JST-XHP. Do not waste your money. 1Great product, read these instructions first After experimenting and failing a few times, I came to the reviews and was disheartened to see so many people reporting a defective product. But there amongst the darkness, there was light!KITT Eire posted some great instructions and now I'm crimping as good as Honnold. Here's his review:https://www.amazon.com/gp/customer-reviews/R33P6EKOV16O8U/ref=cm_cr_arp_d_rvw_ttl?ie=UTF8&ASIN=B016B39EPQMajor takeaways:1. Straighten the wings with fingers or pliers (they should be perpendicular to the flat bottom of the connector2. Place the connector upside down in the crimping tool, so that the flat bottom is facing up toward the teeth of the tool3. Strip just enough wire so that the insulation is grabbed by the first set of wings but not the second set.4. For the female connectors (that have sort of boxes on the ends), DO NOT CRIMP THE BOX. Additionally, there is a small tab sticking out of the bottom of these boxes, make sure that doesn't get crimped down either.If the female piece isn't sitting snugly inside the plastic holder, the bottom tab is likely bent down. You can bend it back out very slightly and try again until it sits nicely. It should catch and 'lock' into place as you press it in. 5Good tool for the money. I've used a lot of crimp tools in my 31 years of engineering and this one works very positively. It's a little tricky to get the pins in, but one seated accurately you get good connections to wires. It crimps both wire and insulation at the same time. Cheaper tools require two phases, one for the wire and a second for the insulation. This one does both at the same time. Construction is very husky and well built. I think this will least quite a long time. I'm very happy with it. 5Fine crimping tool for JST connectors it has some issues such as not staying latched and the alignment needed some adjustment but after that it was a wonderful JST crimping tooli would like to see it shaved down a bit more so i could leave the metal strip on the pins when crimping for something to hold like i have seen with other crimping tools but other than that it works great 4A+ tool. But use these instructions So I read the other reviews, and watched a few YouTube videos and honestly it does look like some folks aren't using it right.There are NO instructions and that's where people are getting stuck*** Hilitchi - I would suggest you include a YouTube showing how to use this properly and your reviews will be 5 stars*** I don't know why you haven't done this.I'm going to post some photos soon to try help. I have 10 wire multi-conductor cable and it crimped all 10 with 2 mistakes made by by me. You have to follow the following steps (I may do an Instructable).Your objective is to crimpa) The insulationb) The bare wireSimultaneouslyI was using the below kit (Hilitchi 520Pcs 2.5mm)https://www.amazon.com/gp/product/B0188DMF3A/ref=oh_aui_search_detailpage?ie=UTF8&psc=1Its a small connector, so it uses the smallest crimp valley.For the female side===============1. Push the outer pins in with your nails or a pliers so that they are straight2. Do a test by feeding the wire into the uncrimped connector, make sure the insulation is going to be crimped by the 1st set of wings and does not extend into the wire crimp section, the bare wire should only be crimped by the second set of wings3. Place the connector into the smallest crimp "U" socket with the wings facing down and the flat part touching the crimp die4. Feed the wire in so that you can see it come in contact with the connector face (barely)5. Crimp it hard till you hear it click 2-3 timesThat's it you should be able to pull it and it won't come part6. Feed the crimped connector into the female side so that the little "catcher" goes into the tiny channel and pops out the other side and catches the plastic (so can see this happening if you can't it's in the wrong way round)7. Done!Everything worked perfectly when I did this. It is a great tool as far as I can tell. 5Works but not perfectly Works well for me for DuPont and JST after a bit of practice, much faster and more reliable than faking it with other crimpers or pliers. If the DuPont doesn t fit together easily after making, give the crimped wire a gentle squeeze with some needle-nose pliers to re-round the connector and it s likely to be perfect (my method after practice). You probably could get crimps that make a perctly shaped crimp, but I bet you d pay a lot more. 4Worked just fine for me and my Dupont connectors Worked just fine for me and my Dupont connectors. You have to have the opening face down, not up. This is more than likely why there are so many people saying they don't work. They simply weren't using the tool correctly. Also, none of them state what sizes they were working with. I purchased this kit:https://www.amazon.com/gp/product/B012EOO9Q0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1And had no problems on the smallest crimp valley. Every now and again I'd have to use smaller plyers to shape the metal a bit more square to fit into the plastic sockets. But this went away the better I got at it. 5
Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With

Hilitchi Professional Pin Crimping Tool 2.54mm 3.96mm 28 18awg 0.1 1.0mmâ² For Dupont Terminals With

3.5
Error You can't add more than 500 quantity.
Regular price
€50,00
Sale price
€50,00
Regular price
€82,00
Sold out
Unit price
per 
Save 39% (€32,00)